FR SHEER DEVELOPMENT

Flame-Retardant Sheer Fabrics for Curtain Collections

Develop flame retardant sheer fabrics for curtain collections with FR finishing available across the UNITEC voile range. We help importers, curtain manufacturers, distributors and project buyers compare selected references, arrange samples and confirm applicable SGS documentation for NFPA 701 and BS 5867.

Final suitability and documentation should be confirmed for the selected fabric reference, colour, construction and intended application.

PROJECT-READY SHEER DEVELOPMENT

How to Select Flame Retardant Sheer Fabrics With Confidence

Flame retardant finishing can be developed across the UNITEC voile collection. The correct selection starts by matching the intended market, selected reference and curtain configuration with the applicable fire requirement.

A test report supports the stated tested configuration. Confirm the final reference, colour, finish and application before relying on documentation for a collection or project.
01

Confirm the Fabric Reference

Select the voile reference, colour, width, construction and FR finishing direction required for the intended curtain collection.

02

Match the Fire Requirement

Confirm whether the requirement is NFPA 701, BS 5867 or another project-specific standard before finalizing the selected fabric.

03

Review the Final Configuration

Establish whether evidence is required for fabric alone or for a finished curtain arrangement with lining, tape or other layers.

Flame retardant sheer fabrics for project curtain collections by UNITEC

A PROJECT-READY SHEER DIRECTION

Considered Light Starts With the Selected Fabric Reference

Flame retardant sheer fabrics can help buyers develop a softer visual layer for contract and curtain collections where a defined fire requirement must also be considered. The right starting point is the selected voile reference, its final colour and the intended application.

Confirm the required standard, finished-curtain configuration and applicable SGS documentation before final product selection.

FROM COLLECTION IDEA TO PROJECT REVIEW

Build Flame Retardant Sheer Fabrics Around Your Actual Requirement

UNITEC can develop flame retardant finishing across the voile collection. Start with the visual direction and practical curtain requirement, then confirm the selected reference and applicable SGS documentation for the final program.

01

Choose the Collection Direction

Begin with the intended visual result: clean plain sheer, linen-look, textured surface or a more decorative curtain direction.

02

Select Width and Scale

UNITEC voile references are available in 2.8 m, 3.0 m, 3.2 m and 3.6 m widths, subject to the selected product reference.

03

Compare Reference-Level Character

Individual references vary in mass, thickness and visual character. Physical samples remain important for final handfeel and curtain appearance review.

04

Match the Documentation Scope

Confirm the selected reference, colour, final configuration and the required standard before requesting NFPA 701 or BS 5867 evidence.

VOILE COLLECTION BASELINE

Confirmed Catalogue Parameters

Final data should always be checked against the selected product reference and approved sample.

Composition 100% Polyester
Available Widths 2.8 m / 3.0 m / 3.2 m / 3.6 m
Reference Weight Range 50–192 gsm ±5%
Reference Thickness Range 0.13–0.57 mm ±10%
Standard Roll Length 100 m
Colour Fastness 5–6, Blue Scale

A MORE CONTROLLED SOURCING PROCESS

Bring the Right Documentation Into the Right Product Decision

For flame retardant sheer fabric programs, the most useful information is not a generic certificate list. It is the documentation that matches the selected fabric reference and the buyer’s actual market or project requirement.

01

Define the Requirement

Share the target market, intended application and named fire standard before confirming the preferred voile direction.

02

Compare Fabric References

Review samples for colour, surface character, handfeel, transparency and the final curtain effect required for the collection.

03

Check Supporting Evidence

Confirm applicable SGS documentation for the selected FR finishing program, including the required NFPA 701 or BS 5867 scope.

04

Confirm the Final Program

Align the approved sample, product reference and documentation before moving into collection planning, quotation or project coordination.

SUPPORTING PRODUCT INFORMATION

Documentation Should Follow the Selected Reference

UNITEC can support product-specific technical information and applicable SGS documentation for FR finishing programs. Supporting GREENGUARD and OEKO-TEX documentation can also be reviewed against the selected voile reference and buyer requirement.

BUILD THE RIGHT FR SHEER PROGRAM

Discuss Flame Retardant Sheer Fabrics for Your Collection

Share your target market, required fire standard, intended curtain application and preferred voile direction. UNITEC can help you compare selected references, arrange samples and confirm the next product-specific information and SGS documentation required for your program.

Scroll to Top